Jewelry Art: Bird in Flight torque ~ Fancy version

Some pieces of jewelry are actually miniature sculptures, and can even stand alone. In the past, these were often called "cabinet jewelry", and while it was meant to be a somewhat derogatory term that implied it was hard to wear, I have enjoyed making a few pieces like that in the past. But then once in a while, on the other hand, a truly successful artwork in the medium of jewelry surfaces - one that forms a symbiosis with its wearer. Such a piece is actually not complete until it is WORN. Seen by itself, it just sits there - but once it is put on, it literally comes to life. This necklace, titled "Bird in Flight" is just such a piece!

"Bird in Flight" (fancy)
click image to enlarge

It is called a "torque" necklace, because it relies on the torque or springiness of the silver neckwire to hold its shape. The silver is hand-hammered on a polished anvil with polished hammers, not only to shape it, but to impart the "memory" of its graceful shape that clings to the nape of the neck. The position that it naturally comes to rest is actually on the SHOULDERS, not the back of the neck! Thus, its wearer is allowed total freedom of movement without feeling any sort of binding on the neck.

This position results in something remarkable happening that makes it an incredibly flattering piece to wear: First, it exposes the beautiful curve at the base of the neck, where the neck swoops into the shoulders (one of the most beautiful lines on a woman's body).... and, secondly, because the necklace is open on the front, there are no horizontal lines across the front of her throat, so the full sweep of the neck is visible in the front! Perhaps my most flattering piece when worn. The neat thing, though, is that the neckwire is wide enough so that it can be worn on a turtleneck, too.

Although the overall design remains the same, each one is handmade in different combinations of amethysts, freshwater pearls and decorative accents that makes it unique. Yours will be different in details than the one pictured here, but the overall "look" will be the same.

The "wing" surface is cast from a torch-textured silver piece (in a process called "reticulation"), that emphasizes a rich, furrowed texture that contrasts nicely with the polished silver framework. This textured surface is patinated by a process that involves careful application of a chemical oxidizer that colors the metal dark grey, and then selectively removing it on the high spots so the bright silver shows through.

This piece currently goes for $1600 in the fancy version shown here, with amethyst and freshwater pearls...but I also make it as a plain silver version (here, and photo above). Check out the earrings I designed to go with it (also to be posted soon!)

I'll have a shopping cart set up soon, but meanwhile just call me personally at the studio to order one: (505) 296-1400, or Email me at: David@StewartArt.com - I'll be in touch!

DESIGN, PHOTO AND TEXT © DAVID LLOYD STEWART - ALL RIGHTS RESERVED

Jewelry Art: Bursting Pearls Pin/ Pendant

This combination pin/ pendant is titled Bursting Pearls, because I made it so that the pearls appear to be bursting out of the background, as if emerging from volcanic fields. I generally use baroque freshwater pearls with a sort of pinkish hue, to contrast nicely with the frosty silver textured background.

click image to enlarge

The texture was achieved in the original handwrought master by a process called reticulation - a meticulous process using the torch to wrinkle the surface by bringing it close to the melting point. This cast silver piece was then treated by heating it red-hot and quenching it in acid over & over again - this dissolves the copper out of the sterling alloy, leaving pristine pure silver on the surface. The effect achieved is unlike any other process I know of, and forms a pearlescent beautiful white silver color that contrasts wonderfully with the polished "rails" that run along the sides.

If you look at the back of the piece, you can see the secret to its versatility: it's not just a pin, but it also has a hand-crafted "enhancer" bail that opens & snaps closed. It's pictured on a snake chain here (not included), but that bail enables you to wear it on liquid silver necklaces, pearl strands, beads, or neckwires as well! Really versatile. The current price on this pin/ pendant is $355, but with the price of precious metals being so volatile, check with me to see if any price adjustments have to be made. Shipping generally runs about $10, unless you have a special request like overnight or out-of-country.

Call me at the studio at (505) 296-1400 to place your order.

DESIGN, PHOTO AND TEXT © DAVID LLOYD STEWART - ALL RIGHTS RESERVED

Jewelry Art: My Favorite Ring

Despite its simplicity, there's a reason this ring is my favorite - and that is that it's YOUR favorite! I've been making this ring design for over 18 years, and it's always been a best-seller at the fairs I've done coast-to-coast. Variations on this bubbly theme were some of the very first designs I handmade in jewelry 30 years ago.


I also make a plain version of this ring (with no pearl), but this one with a plump, pinkish freshwater pearl is actually the first version I came up with. I guarantee the pearl will remain intact: First, I drill each pearl and set it on a silver post that is cast into the ring, and secondly, I use EPOXY to hold it on. More tedious to use, but it's much tougher than traditional pearl cement. So ... if you ever lose the pearl, just send it back to me, and I'll put a new one on at no charge!

I can make this ring in virtually any size - it looks GREAT on any finger. Just specify your size, and I'll make one just for you for $58. plus $10 shipping & handling. Just Email me at: David@StewartArt.com , or call me personally at the studio: (505) 296-1400.

I'll be glad to send you one of my favorite rings!

DESIGN, PHOTO AND TEXT © DAVID LLOYD STEWART - ALL RIGHTS RESERVED